The FNX Magazine Base Pad Extension adds two and half (2.5) rounds to the existing standard capacity magazine for the FNX 45 model pistols. "Why is it 2.5 rounds, not 2 and not 3," you ask? Our mag extension provides space for 2 additional rounds to be...

The Apex Extended Mag Release for the FN 509 model pistols is single side activated and a direct replacement for the factory magazine release. It incorporates an extended length to the mag release button and improves performance by making it easier to...

From CAOS Comes Order! Optic Mount for use with the Dorin Technologies DT-CAOS Five seveN Red Dot mounting system. *Requires DT-CAOS optic mounting system sold separately. Please read below for compatibility. Professional Installation Recommended...

Drop in selector for FN SCAR family. Simple install utilizing existing set screw (not supplied). The Magpul SSG Selector Set are drop-in, dual sided selectors for the FN SCAR family of weapons. Designed at the request of a deploying military unit who...

IWC's "SCAR CHARGER" eliminates the possibility of injury and torn knuckles caused by the factory FNH Charging Handle running into your optic mounts when charging your SCAR. IWC's "SCAR CHARGER" PROJECT GOALS: No host weapon wear; no weight gain vs...

Looking for a reliable upper receiver spring set for your Stainless Steel PS90® firearm? Look no further than Dorin Technologies. The PS90® Compatible Upper Receiver Spring Set is made from high-quality stainless steel and designed to provide...

The Apex Bolt Charging handle fits the entire family of FN SCAR Rifles, including the SCAR 16S/Light in 5.56mm and the SCAR 17S/Heavy in 7.62mm and installs in minutes. The Apex SCAR Bolt Charging Handle for the SCAR 16S/SCAR Light and SCAR 17S/SCAR...

This Apex 9mm Threaded Barrel is designed specifically for the FN 509 Compact model pistols with a factory 3.70″ barrel. The heat treated stainless steel barrel has a black Melonite finish. The barrel features a 1:10” twist rate that is designed to...

This Apex 9mm Threaded Barrel is designed specifically for the FN 509 model pistols with a factory 4.00″ barrel. The heat treated stainless steel barrel has a black Melonite finish. The barrel features a 1:10” twist rate that is designed to...

Now available for both Reciprocating and NRCH (Non-Reciprocating Charging Handles) models The Scarging handle fits both 5.56 and 7.62 NATO versions of the SCAR, and installs in seconds. The Scarging handle fits both 5.56 and 7.62 NATO versions of the...

The toughness of Maxim Defense Picatinny Rail Mount Stocks are available for your AR style rifles. Built with the same functionality and durability as our best-selling Gen-6 and Gen-7 stocks for AR-15, your Picatinny Rail Mount stock finally has a brace...

The FN SCAR SSR Rear Stock is the ultimate precision upgrade to your SCAR 16S and 17S, allowing you to quickly convert your carbine into a DMR-style rifle that is fully adjustable for length of pull (LOP) and cheek height. No tools required! Designed to...

Attach accessories to the side of your factory P90/PS90® receiver with a PS90 aluminum picatinny rail from Dorin Technologies. Buy one for a minimalistic approach, or buy 2 for symmetry. Each set comes with one rail and all mounting hardware...

The Apex Optic Mount allows the user to securely mount the Aimpoint® Acro Series optics to the slide of their FN 509. The low profile design of the mounting plate insures co-witnessing between the suppressor height sights and the Acro Series optics...

The Apex Optic Mount is designed to securely mount the Shield Sights RMSc or Holosun 507K to the slide of the FN 509 model pistols with the FN Low Profile Optics Mounting System™. The Apex Optic Mount is machined from a billet of steel and...

Combine the EFK Firedragon 5.4" threaded barrel for the FN Five seveN with your choice of compatible silencer.  *Requires specially licensed dealer. Please check with your FFL to ensure they can accept a silencer for transfer prior to making your...

Upgrade your FN 509 with the hottest accessories from Apex Tactical Specialties. This bundle includes Your Choice of Apex Tactical FN 509 Trigger Apex Tactical 509 Disassembly fixture Apex Tactical FN 509 Heavy Duty Striker Apex Tactical FN 509 Stiker...

The VLTOR SCAR stock is a replacement module for the FN SCAR, incorporating the same battle-proven enhancements from the VLTOR modstocks. This replacement module for the FN SCAR incorporates the same battle-proven enhancements from the VLTOR modstocks...

The Imperial Arms Enhanced Take-Down Button for the P90/PS90® has a checkered surface for improved feel and function. It is also lighter than the factory assembly and gives your rifle a premium look. *Spring not included. The barrel must be removed...

Adds a unique, stylish and functional look to your PS90. Narrow and Wide versions available. Includes 3 x MAGPUL MLOK Rails and stress free hardware pre-installed. Compatible with the FN P90/PS90 receiver only Please allow 5 business days for this...

Raise your line of sight for high mounted optics such as the Lucid H7 or even AGOC. Our PS90 Cheek Rest is made in the U.S.A. and includes all mounting hardware. The built in Quick Detach mount is great for a QD mounted sling (sold separately). Please...

Attach accessories to the side of your factory PS90 receiver with a PS90 aluminum picatinny rail from FNspeciaties.com. Buy one for a minimalistic approach, or buy 2 for symmetry. Each set comes with one rail and all mounting hardware. Our PS90 Side...

Direct mount 9-position 1913/Picatinny rail for the FN P90/PS90. Our rail features two integrated QD sling pockets, freeing up valuable space on your receiver for switches, lights, and other controls. Machined from billet 6061T6 aluminum and hard coat...

Directly mount any SureFire® Scout Pro series light to the FN P90/PS90 receiver. We designed this mount to be low profile, light weight, and simple. The result is a clean mounting solution that allows any SureFire® Scout Pro light to be...

Direct mount QD sling point for the FN P90/PS90 receiver (front). This QD sling point is symmetric and can be mounted to either the left or right side of the P90/PS90 receiver. Our QD mounts are designed and tested to multi directional high pull loads...

Stock side (rear) direct mount QD sling point for the FN P90/PS90. Use the drop down box to select between either Left or Right side fitment. Our QD mounts are designed and tested to multi directional high pull loads and are suitable for...

Seamlessly integrate your compatible optic into the FN P90/PS90 using HB Industries' low profile mount. These optic mounts are designed to reduce the height over bore issues typically associated with the P90/PS90, provide a more natural/comfortable...

SCAR® compatible barrel extention screws made with hyper tough S7 Tool Steel for unparalled durability.  The Imperial Arms Co SCAR® compatible barrel extention screws are the perfect component for your Cypher built, or factory SCAR®...

Improve the fit and finish of your PS90. The Imperial Arms Cocking Handle Assembly for the P90/PS90 is superior in construction (as compared to factory assembly) and gives your rifle a premium feel. It also does away with the need to add separate...

NEW MK2! Add form and function to your SCAR 16 or SCAR 17 without compromising on weight. Available in Black or FDE, and in 3 x lengths: 2.2", 4.25" and 6.5" (measured from the end of the SCAR receiver) *Requires basic gunsmithing knowledge and...

Add a QD sling mounting point to your PS90 with no permanent modifications to your firearm. Easy installation. New Design! Now made of steel for increased durability. Low cost and easy to install Quick Release Sling Mount for your FN Herstal PS90/P90 PDW...

Mount your RedDot Optic to your PS90 as low as possible with this Low Profile Red Dot Mount from FNSpecialties.com. Rugged. CNC machined from 6061-T6 aluminum Lowers your optic closer to the bore axis Improve accuracy at varying distances Tight...

The MBUS (Magpul Back-Up Sight) is a low-cost, color injection molded, folding back-up sight. The MBUS Front Sight is adjustable for elevation and fits most 1913 Picatinny-railed hand guards, but is specifically tailored to the AR15/M16 platform.

The MBUS (Magpul Back-Up Sight) is a low-cost, color injection molded, folding back-up sight. The dual aperture MBUS Rear Sight is adjustable for windage and fits most 1913 Picatinny rail equipped weapons, but is specifically tailored to the AR15/M16...

Add 1/2″x28 threads to your factory PS90 with 16″ barrel by replacing the factory barrel shroud with integral muzzle brake. Maintains all federal rifle length requirements. 1/2×28 thread protector not included. *Requires professional...

Buy the best forward grip and bi-pod for your SCAR 16 or SCAR 17.  This Grip Pod is the Military version with steel inserts. With a new, improved ergonomic grip design, the latest Grip Pods are now better than ever. Available in both standard (Wing Nut)...

The best choice for your PS90 SBR project. Pair this with a CMMG PS90 Flash hider or thread adaptor to complete your SBR. Tax Stamp and gunsmithing required. 10.4″4140 Chrome Moly VanadiumManganese Phosphate Coated1:9 Twist5.7×28...

The Complete Multi Cal Package. GSL's new Multi Cal suppressor is set up with everything you need to suppress shots from .22 caliber all the way to 300 WIN MAG. GSL Technology strives to manufacture The World’s Finest Suppressors. Recently, they...

Caliber: 5.7 x 28mmSound Reduction: 32 dBLength: 7.25” with no adapterDiameter: 1.375″Weight: 12.5 oz.Mount: 12x1mm/quick attach Packing Includes the following:(1) Suppressor(1) 12x1mm direct thread flash hider with integrated quick...

Caliber: 5.7 x 28mmSound Reduction: 32 dBLength: 5.8” with no adapterDiameter: 1.25″Weight: 5.2 oz. with no adapterMaterials: 7075 AluminumMount: 10x1mm (FN Thread Pitch) & 1/2×28 Packing Includes the following:(1) Suppressor(1)...